NON-REMOVABLE PIN (NRP)
Set screw in barrel intercepts groove in loose pin as shown.
This set screw is tightened down against the pin. n most cases, the pin has a groove in the position where the set screw makes contact, allowing the set screw to seat.
Set screw is not accessible when door is closed. Specify “NRP†(non-removable pin) when ordering.
ELECTRIC THROUGH WIRES (ETW)
The Electric Hinge provides an easy means to monitor the opening as well as transferring power from the frame to the door.
Application
- Electrified Mortise and Cylindrical Locks
- Electric Strikes (on pairs of doors only)
- Electrified Exit Trims
- Electrified Exit Devices – Latch Pullback or
Retraction, Latchbolt & Touchbar Monitoring - Request to exit functions
- Door mounted card readers
Configurations
-
•
- 2 wires, 18 AWG
- 4 wires, 28 AWG
- 8 wires, 28 AWG
- 12 wires, 28 AWG
•
•
•
Other Features
- 12†x 48†standard length of wire
- Recommended to be installed in center hinge location
Note
- Packed as 1 piece per box
- An electrically modified hinge is for low voltage power transfer only (50 volts or under). Higher
voltages are not allowed because of the potential dangers. Another consideration is the Ampere
Rating (from DHI Tech Talk). - Other wire lengths available by order
PLUG IN CONNECTOR (PIC)
- Plug In Connector makes a connection in field
faster and creates a positive interlocking between
the hinge side of the door and the device. - Specify “PICâ€, wire gauge and number of wires
when ordering.
RADIUS CORNER (RC)
- Radius Corners are primarily used on Aluminum
doors and frames. - Available in ¼†and 5/8†radius
- Specify “RC†and the radius when ordering
HOSPITAL TIP (HT)
- Hospital Tip barrel ends are sloped, making it
easier to clean and making it difficult to attach rope,
clothing or other ligatures. - The pin is held in place by a cross pin for security
reasons - Used primarily for security areas in hospitals and
in prisons - Specify “HT†when ordering
- Not available in all models